กล้อง Canon V1 ดูๆไป ผมเห็นว่ากล้องยังขาดความสมบูรณ์อยู่หลายประการ อันนี้เป็นความเห็นส่วนตัว คนอื่นอาจคิดไม่เหมือนกับผม จริงๆ แล้ว ผมตั้งใจจะเขียนเรื่องนี้สัก 3-4 คอน โดยในตอนแรกนี้ขอนำเสนออุปกรณ์ 2 อย่างก่อน และจะมีตอนที่ 2-3 ต่อไป ที่ต้องเขียนเป็นตอนๆ ก็เพราะอุปกรณ์ที่ต้องการยังได้มาไม่ครบตามที่ตั้งใจไว้
อุปกรณ์สำหรับกล้องรุ่นนี้ ผมจะเสนอเพียง 2 ตัว ก่อน
1. กล้องรุ่นนี้ เลนส์เป็นฝาปิดแบบปิดปิดในตัวกลีบพลาสติกที่ค่อนข้างบอบบาง บางคนอาจเป็นว่าไม่ถึงกับบอบบางอะไรมากนัก แต่ถ้าเกิดหน้าเลนส์ไปกระแทกกับขอบโต๊ะ โดยเฉพาะมุมโต๊ะ หรืออะไรอื่น อาจทำความเสียหายให้กับหน้าเลนส์ได้ ผมเลยมีความต้องการจะหาฝาปิดเลนส์มาใช้ป้องกันไว้
มาดูอุปกรณ์ตัวแรกกันเลยความ อันนี้เรียกว่า Slip-on lens cap หรือ Push-on lens cap คือเป็นฝาปิดเลนส์แบบสวมครอบลงไปที่วงแหวนควบคุมกล้อง โดยดันเข้าไปตรงๆ ครอบแล้วดูแข็งแรงดี

ฝาครอบเลนส์รุ่นนี้ขนาด 61mm ต้องขนาดนี้เท่านั้น ฝาตัวนี้เป็นพลาสติก จริงๆ ผมอยากได้ฝาที่เป็นยาง แต่หาไม่เจอครับ ครั้นเมื่อได้ลองตัวนี้ ก็โอเคเลยครับ ปิดแน่นสนิทดีมาก จับฝาปิดเลนส์ยกล้องก็ไม่หลุด ถ้าเป็นฝายางอาจหลุดได้ หากคุณจะใช้ฝาครอบเลนส์รุ่นนี้ ตอนถอดออกโดยที่มันปิดแน่นกระชับ จึงดึงออกตรงๆ ไม่ได้ครับ ผมใช้นิ้วโป้งแงะเบาๆ ก็หลุดแล้ว ฝาปิดเลนส์รุ่นนี้ผมสั่งซื้อจาก AliExpress ในราคาแค่ 30 กว่าบาท ส่งฟรีด้วย คุ้มสุด
คำเตือน เมื่อปิดฝาเลนส์แล้ว เวลาจะเปิดกล้องใช้งาน ต้องถอดฝาออกก่อน ไม่งั้นกล้องไม่ทำงาน ดังภาพด้านล่างนี้

2. L-Plate หรือ L-Bracket โดยที่เวลาจะถ่ายภาพหรือถ่ายวิดีโอแนวตั้ง บางครั้งต้องการใช้ร่วมกับ Tripod ฉะนั้น L-Plate จึงเป็นสิ่งจำเป็น แต่ตัว L-Plate ตรงรุ่น มันยังไม่มีออกมาจำหน่าย รุ่นที่ผมสั่งจาก AliExpress คือ Bexin รุ่น MPU-105L เป็นแบบ Universal ดังนั้น เวลาจะเปลี่ยนแบตเตอรี่กล้อง ก็ต้องถอด L-Plate ออกก่อน แต่ก็ยอมรับได้ เพราะต้องการใช้งานไปพลางๆ ก่อน และราคาที่ซื้อมาแค่ 200 บาทต้นๆ ก็ไม่ต้องคิดอะไรมาก เมื่อมี L-Plate ที่ทำมาเพื่อกล้อง Canon V1 โดยเฉพาะ ก็ค่อยว่ากันใหม่

นอกจากใช้ L-Plate สำหรับวางกล้องเพื่อถ่ายภาพ/วิดีโอแนวตั้งแล้ว เราสามารถขยับระยะของฐาน L-Plate เพื่อให้ชิดหรือห่างจากด้านซ้ายของกล้องตามต้องการได้ ซึ่งผมชอบเว้นระยะให้ห่าง เพื่อใช้เป็น Handle หรือที่จับเวลาถ่ายวิดีโอ ทำให้ถนัดมือดี แต่ก็มีข้อเสียอยู่ จอของกล้อง มันจะกางออกได้ระดับตรงๆ เท่านั้น จะบิดเปลี่ยนมุมของจอไม่ได้

Canon V1 Accessories
I feel that my Canon V1 needs some more accessories. This is, of course, my opinion—others may not feel the same way. In fact, it’s my intention to write about the accessories of Canon V1 in 3 to 4 parts, with more parts to follow. The reason is I still haven’t possessed all the accessories that I need.
1. The front lens of this camera comes with a built-in plastic blades that’s somewhat fragile. Some people may feel it’s not all that delicate, but imagine if the lens hits the edge or the corner of a table or some other hard surface. That could cause actual damage to the lens. For this reason, I wanted to find a proper lens cap to protect the lens.
Let’s look at the first accessory, called a slip-on or push-on lens cap. This type of lens cap can’t fit inside the filter ring on the front of the lens. It simply slips over the ‘Control ring’. With the Canon V1’s limitation design of the front lens, a slip-on type is a perfect solution. You just push it straight onto the ‘Control ring’, and once in place, it feels secure and firm.

The size of this plastic lens cap is 61mm. Ideally, I would have preferred a rubber one, but I couldn’t find any. Once I tried this plastic version, though, it turned out to be just fine — it fits snugly. You can even lift the camera by holding the lens cap, and it won’t come off. I’m afraid that the rubber version might slip off more easily.
If you’re going to use this lens cap, keep in mind that because it fits tightly, you can’t just pull it straight off. I simply use my thumb to pry it off gently, and that works well.
I ordered this lens cap from AliExpress for just a little over $1, with free shipping — excellent value for the price. I live in Thailand, so AliExpress is one of the best platforms for online shopping. Amazon is also an excellent platform to buy online if you live in the US. A Kaiser 61mm slip-on lens cap may be suitable for you .
Warning: If you’re using this type of lens cap, remove it before turning on the camera. Otherwise, the camera won’t operate.

2. The L-plate or L-bracket is useful when shooting vertical photos or videos, especially when using with a tripod. In such cases, an L-plate becomes essential. However, nobody has released a model-specific L-plate for this camera yet.
The one I ordered from AliExpress is Bexin MPU-105L, a universal model. Since it’s not a custom fit, you need to remove the L-plate every time you want to replace the battery. Still, I find it acceptable for temporary use, and it costs only $5, so it’s not a deal breaker to buy it. Once a dedicated L-plate for the Canon V1 becomes available, I’ll consider switching to that.

Besides using the L-Plate to mount the camera vertically for photo or video shooting, you can also adjust the base position of the L-Plate — moving it closer to or further from the left side of the camera. Personally, I prefer leaving some space so I can use it as a side handle for handheld recording of footage. It gives me a more comfortable grip.
However, there is a drawback, the camera’s articulated screen can only open straight out. You can’t twist the screen to other positions.
